|
Ruggedly built for long life. The grizzly bars are made of maganese
steel and are mounted in rubber for shock resistance. The power
requirement is very low using a 7 1/2 H.P. motor. The non-wedging
and non-clogging feature eliminates the necessity for an attendant
cutting operating costs. |
Long
unobstructed clear openings between the bars, coupled with extremely
powerful action imparted by the vibrator, gives this Bar Grizzly
a capacity far greater than would be expected in a machine of its
distance between the bars. Available with spacing from 2" to
8 1/2". |
The
bars are tapered end to end so that the openings between the bars
are larger at the discharge end than at the feed end. The bars are
also tapered from top to bottom, so that there is no wedging of
the material between the bars. The powerful, positive action enables
this Bar Grizzly to handle very sticky material without clogging. |
Requires
a 7 1/2 H.P. motor suitable for multiple V-belt drive. The V-belt
drive consisting of motor sheave, V-belt and driven sheave is furnished
as regular equipment.
|
Built
in one size with a surface 42" wide with clear lengthwise opening
of 5 feet. Overall height including mountings is only 5'-1".
Width 5'-0". Length 7'-4". The actual loss of headroom
from feed point to discharge point is only 3'-2 1/2". Total
weight of entire unit, ready to run is only 5500 pounds. |